JAKO壓力表部分產(chǎn)品型號：
Fig. 1 Compact pressure gauges
for stand-alone process connectionNS 40; NS 50; NS 63
based on EN 837-1
Fig. 101 Compact pressure gauges
with 3-hole front flange for easy flush mountingNS 40; NS 50; NS 63
based on EN 837-1
Fig. 102 Compact pressure gauges
with rectangular front ring and bracket attachment on the back for flush mountingNS 40; NS 50; NS 63
based on EN 837-1
All-purpose pressure gauges
JAKO all-purpose pressure gauges are cost-effective solutions for a wide range of applications in the sanitary, heating and venitlation engineering as well as in the apparatus and equipment engineering sectors.
Fig. 2 All-purpose pressure gauges
for stand-alone process connectionNS 80; NS 100; NS 160
based on EN 837-1
Fig. 201 All-purpose pressure gauges
with 3-hole front flange for easy flush mountingNS 80; NS 100
based on EN 837-1
Fig. 203 All-purpose pressure gauges
with attachment rim on the back for attachment and surface mountingNS 80; NS 100
based on EN 837-1
Heating pressure gauges
JAKO heating pressure gauges are used for pressure and content monitoring in closed loop heating systems. A green reading range (green banner) on the dial indicates the operating pressure, a red mark the maximum admissible valueand a set value pointer that can be adjusted from the outside shows the required operating pressure.
Fig. 5 Heating pressure gauges
with special scale for content measurement in closed loop heating systemsNS 63; NS 80
based on EN 837-1
Hydrometers
JAKO hydrometers indicate the measured pressure on a twin scale in bar and in mWs.
Fig. 6 Hydrometers
with twin scale for direct reading in meter water column (MWC) and in barNS 80; NS 100
based on EN 837-1
Combined pressure and temperature gauges
JAKO combined pressure and temperature gauges save space and money and are designed for the simultaneous measurement of pressure and temperature at a single point of measurement without high measurement accuracy requirements.
Fig. 80 Combined pressure and temperature gauges
for the combined pressure and temperature measurement, center back mountNS 80
Fig. 81 Combined pressure and temperature gauges
for the combined pressure and temperature measurement, center back mountNS 80
Glycerine filled pressure gagues
JAKO gylcerine filled pressure gauges ensure good pointer readibility and a longer life cycle also at measuring points with mechanical vibrations and pulsating pressure loads.
Fig. 130 Glycerine filled pressure gagues
for stand-alone process connectionNS 40; NS 50; NS 63; NS 100
based on EN 837-1
Fig. 137 Glycerine filled pressure gagues
with 3-hole front flange for easy flush mountingNS 40; NS 50; NS 63; NS 100
based on EN 837-1
Fig. 136 Glycerine filled pressure gagues
